SCADAR™ Current & Volt Logger

1050,001164,00

Measure current, volts and true power from 3 phase, 50 or 60 Hz AC power supply cables. Capable of measuring voltage between 100 and 700 Volts and current up to 800 AMP’s.

SKU: N/A Categories: ,
Item Description
Variant Small Clamp (CT) Large Clamp (CT)
Variant Part Number Y15SCAD01 Y11SCAD03
Logger Power Supply Four AA Lithium Primary Cells, Li/Soci2, 3.6v, 2700mAh Batteries
Logger Battery Life 2 Calendar Years Or More (Typical Usage)
Logger Communications Bluetooth 2.1 + EDR Slave Device
Logger Wireless Range 10 Metres (33 Feet)
Logger Real Time Clock (RTC) Precision Real Time Clock With Temperature Compensated Crystal
Logger RTC Accuracy 0.4 Seconds Per 24 Hours
Logger A / D Resolution 16 Bit
Logger Sample Frequency 1 Second (Fixed)
Logger Sample Capacity More Than 1.4 Million Samples (16 Days Continuous Logging)
Log Duration 16 Days Continuous Logging
Logger Software Pre-Programmed Application Software
Logger Update Method Wirelss (Via Base Station)
Logger Operating Temperature 0°C To +55°C (+32°F To +131°F)
Logger Dimensions (WxHxD) 98 x 203.2 x 34.8mm (3.8 x 8.0 x 1.3 Inch)
Sensor Power Supply Not Applicable
Ac Current Range 0 Amp – 50amp (+/- 1%) 10 Amp – 800amp (+/- 1%)
Max. Non Destructive Current 400A 2000A
Rise / Fall Time < 400ms
Burden Resistance ≤ 15 Ohm ≤ 1.8 Ohm
Useable Frequency 50Hz – 60Hz
CT Operating Temperature -35°C to +60°C (-31°F to +140°F) -10°C to +50°C (+14°F to +122°F)
CT Storage Temperature -35°C to +70°C (-31°F to +160°F) -40°C to +70°C (-40°F to +160°F)
CT Safety Rating CAT III 600 V
CT ‘Jaw’ Capacity 30mm (1.18 Inch) 52mm (2.05 Inch)
CT Dimensions (WxHxD) 67.5 x 75.5 x 24mm (2.66 x 2.97 x 0.94 Inch) 111 x 216 x 45mm (4.4 x 8.5 x 1.7 Inch)
Ac Voltage Range 100 V To 700 V (+/- 1%)
Volt Measuring Lead Set 1.5metre (5 ft.) Red & black with safety shrouded, standard diameter ‘banana plugs’, right angle connector on one end and straight connector on the other
Voltage Measuring Device Red & black alligator clip set with insulated, nickel plate jaws that grab round screw heads up to 9.5mm
Voltage Measuring Safety Rating CAT IV 600 V / CAT III 1000V, 10A
Voltage Measuring Alternatives Standard diameter ‘Banana Plug’ compatible alternatives
Case Protection Polypropylene Case With Molded Cushion Insert
Case Features Carry Handle, Case Latches, Feet & Stacking Grips
Case Dimensions (WxHxD) 437 x 379 x 100mm (17.2 x 14.9 x 3.9 Inch)
In The Box Logger, Logger batteries, CT clamp, Voltage lead set, Voltage clips
Warranty 1 Year Limited Warranty
Regulatory Mark CE
Ac Current Range

0 Amp – 50amp (+/- 1%), 10 Amp – 800amp (+/- 1%)

Basket

No products in the basket.